What is the Mold Opening Process for Aluminum Profiles?

As an Aluminum Rack System Factory, let me share with you.

The aluminum molding requires molds, generally extrusion molding, which also requires aluminum mold opening.  

Aluminum Profiles   

Under the action of three-way uneven compressive stress, the blank is extruded from the orifice or gap of the die to reduce the cross-sectional area and increase the length. The processing method to become the desired product is called extrusion, and this processing of the blank is called extrusion molding. . Extrusion, especially cold extrusion, has high material utilization rate, improved material structure and mechanical properties, simple operation, high productivity, and can produce long rods, deep holes, thin-walled, and special-shaped cross-section parts. It is important to avoid cutting Processing technology. Extrusion is mainly used for the forming of metals, but also for the forming of non-metals such as plastics, rubber, graphite and clay blanks. When is extruded, the billet produces three-way compressive stress, and even the billet with lower plasticity can be extruded.

Aluminum profile mold opening process:  ①: Learn more about the mold opening product parameters according to the requirements of use, such as: specifications, mechanical properties, etc., shape and structure (product specifications, dimensions, and structure difficulty will directly affect the cost of mold opening customization); ②: Based on the above understanding, the technical staff began to issue design drawings and technical parameters; ③: Both parties confirmed the drawings and stamped them (purpose: to ensure that there are differences due to product problems in the later period and obtain evidence);  ④: develop molds (molds) It is an important link in the production of 6063 series aluminum profiles, which determines the structure of the profile), and detects the accuracy of the mold (the mold design accuracy control range is ±0.02mm);  ⑤: According to the developed mold, the sample is tested and extruded. Confirm that the samples are correct and mass production can be carried out.

Our company also has Aluminum Profiles on sale, welcome to contact us.